Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Lucedale, MS

Wayne Dalton Garage Door Roller Replacement in Lucedale, MS

Worn steel or plastic rollers swapped for quiet, sealed nylon rollers. Typical cost $150-$350.

Our Wayne Dalton garage door roller replacement service in Lucedale, MS comes down to three things: a clear diagnosis, the right parts on the truck, and a door that is balanced and safety-tested when we finish. Worn steel or plastic rollers swapped for quiet, sealed nylon rollers. Our technicians service Wayne Dalton garage doors regularly and know where the model and date labels are, which makes ordering the right part quicker. Wayne Dalton is part of the Overhead Door Corporation. Many Wayne Dalton doors use the TorqueMaster spring system, with the springs sealed inside the torsion tube, so spring work needs TorqueMaster parts and a different procedure.

When to call for Wayne Dalton garage door roller replacement

  • Grinding, squealing or rumbling as the door moves
  • The door shakes or jerks in the track
  • Cracked, chipped or wobbly rollers
  • Rollers that no longer spin freely

Common causes

  • Worn-out bearings in steel rollers
  • Cracked builder-grade plastic rollers
  • Rust or dust packed into the bearings

Safe checks before you call

  • Watch the rollers while the door moves. They should roll, not slide.
  • Look for cracked plastic wheels or wobbling stems.
  • Leave the bottom rollers to a technician. They sit in brackets that hold cable tension.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

What happens during the visit

  1. Inspect every roller, hinge and track section
  2. Replace rollers one hinge at a time, with sealed nylon rollers for a quieter door
  3. Replace the bottom rollers safely with tension controlled
  4. Lubricate hinges and bearings
  5. Test for smooth, quiet travel

Wayne Dalton Garage Door Roller Replacement cost in Lucedale, MS

$150-$350Typical range, parts & labor
about 1 hourTypical time on site

What moves the price:

  • Door size and weight (single or double, steel or wood)
  • Which parts need replacing and whether they are in stock
  • Spring type and cycle rating
  • Emergency or after-hours timing

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Other Wayne Dalton services

Serving Lucedale, MS and nearby towns

Humid air in Mississippi rusts cables, roller bearings and hinges, which makes the door noisy and heavy and eventually makes the opener strain.

Close to the coast, salt air speeds up corrosion. Galvanized or coated springs, nylon rollers and stainless hardware hold up better than bare steel.

Our Wayne Dalton garage door roller replacement service covers Lucedale (ZIP code 39452) and nearby towns including Semmes, AL (22.1 mi), Citronelle, AL (24.3 mi), Vancleave (27.2 mi) and Escatawpa (30.4 mi). Call (833) 435-8883 to book a visit in Lucedale.

Wayne Dalton Garage Door Roller Replacement: frequently asked questions

How much does Wayne Dalton garage door roller replacement cost in Lucedale, MS?

Wayne Dalton Garage Door Roller Replacement typically costs $150-$350 including parts and labor, and usually takes about 1 hour. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do Wayne Dalton garage door roller replacement the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is Wayne Dalton garage door roller replacement covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty, and Wayne Dalton warranty terms vary by product and age. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where Mississippi or Lucedale requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my garage door?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the garage door is near the end of its life, replace it. A garage door typically lasts 15 to 30 years. If several panels are damaged, the door is rusted through or rotted, or parts are discontinued, replacing it is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Lucedale, MS

Craftsman Garage Door Opener Repair

Older Craftsman openers with model numbers starting with 139 were built by Chamberlain, so their remotes and parts often match Chamberlain and LiftMaster models from the same era.

Typical $125-$350

Marantec Opener Gear & Sprocket Replacement

Marantec is a German manufacturer of residential and commercial door openers.

Typical $125-$275

Garaga Torsion Spring Replacement

Garaga is a Canadian garage door manufacturer based in Quebec.

Typical $200-$450

Overhead Door Rolling Steel Door Repair

Rolling steel service doors, curtains, guides and springs repaired.

Typical $300-$1,500

Ryobi Garage Door Opener Installation

Ryobi's garage door opener can use the brand's 18V ONE+ batteries as backup power and has accessory ports for add-ons.

Typical $350-$800

Craftsman Opener Gear & Sprocket Replacement

Older Craftsman openers with model numbers starting with 139 were built by Chamberlain, so their remotes and parts often match Chamberlain and LiftMaster models from the same era.

Typical $125-$275

Skylink Garage Door Opener Installation

Skylink makes openers and a wide range of universal replacement remotes and keypads.

Typical $350-$800

Martin Door Garage Door Track Repair

Bent, loose or misaligned tracks straightened, realigned or replaced.

Typical $150-$400

DBCI Roll-Up Door Repair

DBCI makes roll-up doors and hallway systems for self-storage.

Typical $150-$600

Hörmann Garage Door Repair

Hörmann is a German manufacturer of residential and commercial doors and openers with North American operations.

Typical $150-$450

Northwest Door Garage Door Cable Repair

Frayed, snapped or slipped lift cables replaced and the door re-leveled.

Typical $150-$350

Haas Door Garage Door Panel Replacement

Haas Door, based in Wauseon, Ohio, makes residential and commercial sectional and rolling doors.

Typical $300-$900

Garage door stuck, noisy or broken?

Talk to a garage door technician in Lucedale, MS now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote